73
Settings
72
When this function is enabled, the screen
temporarily switches off (The viewfinder lamp
(green) flashes at 1-second intervals.) to save power
if the camera is not used for approx. 30 seconds. If
the camera remains unused for an additional interval
(2 minutes or 5 minutes), it is automatically switched
off. Use this function when you want to get the
maximum possible running time from your battery.
●
!
The Power Save function is disabled during Auto Play and
when a USB connection is being used.
Pressing the Shutter button down halfway while the
viewfinder lamp (green) is blinking once a second
(“FinePix” displayed on the display panel) restores
the camera to the fully active status (ready to
shoot). This is useful since the camera can be
ready to take pictures almost instantly.
●
!
You can wake the camera up by pressing any other button as
well as the Shutter button.

POWER SAVE SETTING (low power setting)

In SET–UP and Playback modes, the function that automatically switches off the LCD monitor is
disabled. However, the camera still switches off automatically if it is left unused for a set time (2
minutes or 5 minutes).

◆To restore power to the camera ◆

When the Power Save function has switched the
camera off, set the Power switch to OFF briefly and
then back to ON to switch the camera back on so
that it is ready to use.
SET–UP
You can use this setting to specify whether
photographed images are displayed after shooting.
ON : Photographed images are displayed for approx. 2 seconds and then automatically
recorded.
OFF : Photographed images are automatically recorded without being displayed.
PREVIEW : The results of your shot are shown as a preview (for image checking) and you can
then choose whether or not to record the image.
●
!
In top5-frame continuous shooting, and final5-frame
continuous shooting, the images are displayed for a set time
before being automatically recorded even when “OFF” is
selected here.
When the “PREVIEW” setting is selected, you can
check images shot in the top 5-frame continuous
shooting or final 5-frame continuous shooting modes.
However, you cannot use the preview zoom.
1You can check the images by pressing “d” or
“c”.
2To record all the images, press the “E” button.

Continuous shooting preview (image checking)

Preview Zoom

When the “PREVIEW” setting is selected, this
function lets you enlarge images for detailed
checking.
1Press “a” or “b” to zoom in or out.
2The setting switches between “Zoom” and
“Panning” each time the “W” button is pressed.
3Press “a”, “b”, “d” or “c” to display another
part of the image.

IMAGE DISPLAY

●
!
You cannot save a cropped image from the preview screen.
●
!
Preview zoom works in the same way as the playback zoom
(➡P.29).
●
!
If you do not want to record any of the images, press the
“T” button.
1Press “a” or “b” to zoom
3Press “a”, “b”, “d” or
“c” to panning
2Switches between zoom and panning
1Press “d”or“c” to
check the images
2Record all