71
Settings
70
11Press the “MENU/OK” button to display the
menu.
2Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “SET–UP”.
3Press the “MENU/OK” button to display the
SET–UP screen.
4Press “a” or “b” to select a menu option and
then press “d” or “c” to change the setting.
5After you have modified the settings, press the
“MENU/OK” button to confirm the changes.
FUSING THE SET–UP SCREEN
●
!
Always switch the camera off when replacing the battery. If
you open the battery cover or disconnect the AC power
adapter without switching the camera off, the camera settings
may revert to the factory default values set at shipment.
●
!
Press “c” for “FORMAT”, “DATE/TIME” or “qRESET”.
010302
0405

SET–UP

■SET–UP Menu Options
IMAGE DISP. ON/OFF/PREVIEW ON
Use this option to specify whether the Preview screen (the
photographed image) is displayed after you take a shot. See P.72
for details.
POWER SAVE 2 MIN/5MIN/OFF 2 MIN
Use this option to specify whether the camera’s power
consumption is reduced and the camera is subsequently switched
off automatically when it is not being used. See P.73 for details.
FORMAT OK –Erases all files. See P.74 for details.
§BEEP OFF/1/2/3 2 Sets the volume of the tone emitted when the camera controls
are used.
§SHUTTER OFF/1/2/3 2 Sets the volume of the sound emitted when the shutter operates.
DATE/TIME SET –Use this option to correct the date or time. See P.14 for details.
qLCD ON/OFF ON
Use this option to specify whether the LCD monitor is
automatically switched ON or OFF when the Power switch is set
to “q”.
FRAME NO. CONT./RENEW CONT. Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.74 for details.
USB MODE /qPC
Selects whether “”DSC mode or “qPC”PC Camera mode
is used when the camera is connected to a computer. See P.84
for details.
ENGLISH
Use this setting to specify the language used for LCD monitor
display.
qRESET OK –
Resets all the camera settings (other than the DATE/TIME,
LANG. and VIDEO SYSTEM) to the factory default values set at
shipment. A confirmation message appears when you press “c”.
To reset the camera settings, press the “MENU/OK” button again.
Settings Display
Factory default
Explanation
11Set the Power switch to “q” or “w”.
2Press the “MENU/OK” button to display the
menu.
2
3
1Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “6LCD” or
“VOLUME”.
2Press the “MENU/OK” button.
◆SET–UP Menu Options ◆
The options available in the “F” menu vary depending on whether the “q” or “w” mode is selected.
1Press “d” or “c” to adjust the LCD monitor
brightness or the volume.
2Press the “MENU/OK” button to confirm the new
setting.
0102
0102
h“B”, “s”
Still photography mode h“r” Movie mode h“w” Playback mode

6

ADJUSTING THE MONITOR BRIGHTNESS/

ADJUSTING THE VOLUME

4Settings
0102