FujiFilm F610 1 2

Viewing Images

hWhen the camera and computer are exchanging

data, the self-timer lamp blinks and the viewfinder

lamp blinks alternately green and orange.

h“DSC” appears on the display panel.

hPower save and auto power off are disabled

during USB connection.

●

Before replacing the xD-Picture Card, always disconnect the

camera from the PC using the procedure on P.88.

●

Do not disconnect the USB cable when the camera is

communicating with the PC. See P.88 for information on the

disconnection procedure.

1Insert an xD-Picture Card containing photographed

images into your camera. Plug the AC power

adapter connector into the “DC IN 5V” socket on the

camera and then plug the adapter itself into the main

power outlet.

2Slide the Power switch to the “w” position.

3Set the “USB MODE” setting in the “SET–UP”

menu to “¶” (➡P.71).

4Slide the Power switch to the side to turn the

camera off.

1Turn your PC on.

2Open the connector cover on the camera.

3Connect the camera to the PC using the USB

cable (included).

4Switch the camera on.

6.1 CAMERA CONNECTION

6Viewing

Images

The “Camera Connection” section explains how to connect the camera to your computer using the

included USB cable and describes the functions you can use once the camera and computer are

connected.

Turn off the camera and TV. Open the connector

cover for the camera’s A/V OUT (audio-visual

output) socket.

Then plug the included A/V cable (provided with the

camera) into the A/V OUT (audio/visual output)

socket.

Plug the other end of the cable into the video input

socket on the TV. Then turn the camera and TV on

and take pictures or playback images as you would

normally.

●

Plugging in the dedicated A/V cable without first opening the

connector cover could damage the camera.

●

If there is a power outlet available, connect the AC Power

Adapter AC-5VW.

●

Refer to the instructions provided with your TV for more

information on video input for your TV.

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the

AC power adapter when connecting the camera to a computer.

For more information on using the software, refer to “How

to use FinePixViewer” in the HELP menu which was

installed from the CD-ROM.

Refer to Section 5 the first time you connect the camera to your computer.

Do not connect the camera with the computer before

installing all the software.

This mode provides a simple way to read images from an xD-Picture Card and store images on to

an xD-Picture Card (➡P.85).

CD-ROM

(Software for FinePix SX)

¶DSC (Mass storage device)mode

This function allows you to conduct videoconferencing sessions between PCs connected to the

Internet.

●

Videoconferencing (“PictureHello”) is not supported on Macintosh computers.

●

Connection is only possible with a FUJIFILM camera equipped with a “PC Camera” function.

qPC PC CAM (PC Camera)mode

6.1.1 Connecting to a TV

6.1.2 Connecting to a computer

DC IN 5V

(power input)socket

socket

Video(yellow)

Audio(white)

To terminals

(USB)socket

DC IN 5V

(power input)

socket

Camera

0204

USE AT DSC MODE

1Set a camera

2Connect a camera to a computer

Change between “¶” and “qPC” in the camera’s SET–UP screen.

●

Use the AC Power Adapter AC-5VW for the connection

(➡P.13). If shutting off power supply during communication,

the files on the media may be damaged.

●

Take care to ensure that the USB cable (included) is connected

the correct way around and that the plugs are pushed fully into

the sockets.