USET-UP

How to use the SET-UP menu (➝p.122)

 

 

CCD-RAW

Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received from the CCD as an image) performed on the camera. Consequently, this task must be performed on the PC. Use the bundled FinePixViewer software to perform the processing on a PC. Conversion using FinePixViewer also provides a simple way to create TIFF-format images. (Convertible file type will differ depending on your PC. For details, refer to the online help of FinePixViewer.)

CAUTION

•The functions listed below cannot be used in CCD-RAW mode.-During shooting

Digital zoom, Continuous shooting, Quality and Post shot assist window are unavailable.

-During playbackPlayback can be zoomed up to 2.5×, but cropped images cannot be saved.•You cannot take a picture when CCD-RAW is set and the internal memory is used.

CHECK

To rebuild images, FinePixViewer (on the bundled CD- ROM “Software for FinePix CX”) must be installed on your PC.

FOCUS CHECK

Use this function when it is difficult to see whether the image is focused.

N 25

ISO 400

60

8/ 24/ 2006 10:00 AM

F2. 8

Set FOCUS CHECK to ON. The center of the image can be zoomed in by turning the focus ring, and focusing can be more easily achieved in this portion of the screen.

Take the picture to return to normal display.

CAUTION

•Focus check function can be used in the MF mode (➝p.72).•Focus check function is disabled when setting the High-speed shooting mode (➝p.92) or setting EVF/LCD MODE (➝p.123) to “60 fps” in the USET-UP menu.

128