CAUTION

•FinePix S6000fd / FinePix S6500fd is compatible with PTP (Picture Transfer Protocol). A PTP-compatible camera is a camera which can recognize the PC and printer automatically when connected.

•Always use the FUJIFILM AC Power Adapter AC-5VX (sold separately). If the camera suddenly loses power during data exchange, the xD-Picture Card or internal memory could be damaged.

•Do not disconnect the USB cable (mini-B) when the camera is communicating with a PC. If disconnecting the USB cable (mini-B) during communication, the files on the xD-Picture Card or internal memory may cause damage.

•In Mac OS X, you must set the automatic setup when the first time you connect the camera to your PC.

•Make sure that USB cable (mini-B) is connected correctly and pushed in.•Perform pre-arranged steps to disconnect and turn off the camera (➝p.148-149).

•When the camera and PC are exchanging data, the indicator lamp blinks alternately green and orange.

•Auto power off is disabled during USB connection.

•Before replacing the xD-Picture Card, always disconnect the camera from the PC. See p.148, 149 for information on the disconnection procedure.

•The camera and PC may be exchanging data even when “Copying” disappears on your PC screen. Before disconnecting the USB cable (mini-B), always check that the indicator lamp is off.

•Always use FinePixViewer to transfer images with voice memos to a PC.

•An image taken with CCD-RAW (➝p.128) setting is required to be transferred to a PC using FinePixViewer.

DSet a PC.Windows 98 SE / Me / 2000 Professional / Macintosh

CAUTION

The Windows CD-ROM may also be required during installation. In this event, change CD-ROMs as directed by the on-screen instructions.

•FinePixViewer automatically starts up and the Save Image Wizard window (Save Image dialog box) appears. Follow the instructions provided on screen to save the images. To proceed without saving the images, click the [Cancel] button.

*Screen for Windows 2000 Professional

MEMO

•You can only see images saved on a PC. Save images on a PC.

•If you cancel saving by clicking the [Cancel] button, set the Power switch to OFF to turn off the camera and then disconnect it from the PC.

Installation Software

147