2 LOADING THE BATTERY
02
01
03 |
04 |
Your camera requires one 3V lithium battery, type CR2/DL CR2.
1Move the battery cover release knob in the direction of the arrow.
2Flip open the battery cover.
3Load the battery, - end first fol- lowing the instructions shown in the drawing on the inside of the battery cover.
Important: Pay careful attention to the polari- ty of the battery as indicated by the = and
-signs on the battery. The battery must be loaded the correct way or the camera will not work.
4When the battery is loaded cor- rectly, close the battery cover by pressing it until it snaps into place. If it does not snap into place, do not force it but recheck the posi- tion of the batteries.
/One new lithium battery should be enough for about 200 pictures (based on our test conditions).
/When traveling, take extra batteries in the event the batteries stop working. This is important if you visit areas where new batteries may be difficult to get.
/After changing the battery, reset the date to get the right date/time record- ing (➜p.14).
2Do not apply force to the battery cover.
12