How to Use the MENU/SET Button and Four-direction Button
01 |
orange |
02 |
orange |
03 |
orange |
0440 |
green |
1Enter the menu and mode selection E mode.
2Select the menu.
☞Make the menu you want to change blink/ light.
3Select the mode.
☞The current mode blinks.
4Set the mode.
☞The set mode is displayed.
/The LCD backlight is green when the power is turned on and when a mode has been set (goes out after 10 seconds).
/The LCD backlight is orange while the mode is being selected (goes out after 10 seconds of no operation).
/When the LCD is difficult to read at night etc, press any of the z, x, c or v but- tons to turn the backlight (green) on.
7
