3 SELECTING THE REMOTE CONTROLLER MODE
A FUJIFILM remote controller is required.
Remote Controller Holder
Transmitter
Shutter
Release
Button
Remove the remote controller from its holder by sliding it in the direction of the arrow.
/To replace the remote controller in the holder, slide the remote controller in the direction opposite to the arrow until it clicks into position.
/The specific remote controller used may be different than the one shown in the pic- ture.
Fit the remote controller holder into the camera strap.
/The remote controller holder can be easily opened with a coin.
/The battery life is about 3 years (based on our test conditions). If the remote con- troller no longer works, contact your local retailer where you bought your camera or a FUJIFILM service center. A replacement battery will be available at only a small cost.
34
