Mounting and dismounting a CD-ROM disk

●Mounting a CD-ROM

1Press the EJECT button.

Pressing the EJECT button ejects the CD-ROM tray from the drive.

2Pull out the tray.

Pull out the tray as shown on the right.

BUSY lamp

EJECT button

Tray

2

3 With the label of the CD-ROM

Label side

disk facing up, place the

 

 

 

CD-ROM disk in the center of the projection

 

 

 

tray until it clicks.

 

 

 

Hold the tray so that the unit may not be

 

 

 

overturned.

 

 

 

Tray

Projection

4 Push the tray into the PC main unit until it clicks.

The tray retracts into the PC main unit and the CD-ROM is set.

Point

-When the CD-ROM is set, the BUSY lamp goes on. When the BUSY lamp goes off, proceed to the next step.

-Pressing the EJECT button when inserting the tray does not set the tray correctly.

●Dismounting a CD-ROM

To dismount a CD-ROM disk, confirm that the BUSY lamp is off, then press the EJECT button as shown above.

17