Fujitsu 6000 Error Messages

This section provides a list of error messages and suitable responses thereto. Consult this section as required.

Error messages displayed by the PC

Error Message	Description and necessary action

An error occurred at address	If an extended RAM module is used, remove the
xxxx during a system memory	module and determine whether the error recurs. If this
test.	message is not displayed, an extended RAM module
	error is expected. Replace with another extended
	RAM module and determine whether the error recurs.
	If the error recurs, contact a dealer or the your local
	distributor.

An error occurred at address	Confirm that the extended RAM module is mounted
xxxx during an additional	properly and is a Fujitsu product. If the error recurs,
memory test.	contact a dealer or the your local distributor.

An error occurred during a	Set the MAIN switch to OFF, then wait ten seconds
keyboard controller test.	and set to ON again. If the messages is still played,
	contact a dealer or your local distributor.

An error occurred during a	If an external keyboard is connected, confirm that it is
keyboard test.	connected correctly and turn on the power again. If
	this message is still displayed, contact a dealer or the
	your local distributor.

An error occurred during a	Confirm that ‘Floppy Disk Drive A’ is set properly on
floppy disk drive test.	the BIOS setup main menu and that the floppy disk
	drive is mounted correctly. If this message is still
	displayed, contact a dealer or the your local
	distributor.