Memory combination table

Install a memory module to DIMM1 and DIMM2. A memory module has been installed in DIMM1 as standard. Check the combination of memory capacity and slot using the following table to install the memory module. Using a combination other than below may result in faulty operation of the PC.

Point

Use a genuine Fujitsu part called “168-pin SDRAM DIMM (100 MHZ) memory” for this PC. The PC may not work correctly if the recommended Fujitsu memory module is not used.

Installing an additional memory

1 Remove the upper cover.

2 Push down the hooks at both ends of the slot.

24