
●Primary Master/Save, Secondary Master/Slave Menu
Using submenus, set the type of hard disk (master or slave) mounted on the primary IDE connector (Adapter 0) and secondary IDE connector (Adapter 1) as well as the size and the number of cylinders). Move the cursor to a desired item and press the Enter key to display the selected submenu.
|
|
| PhoenixBIOS Setup Utility |
| |||||
| Main | Advanced Security | Power Boot | Info | Exit | ||||
|
|
|
|
| |||||
| Primary Master [FUJITSU MHA2032AT] | Item Specific Help | |||||||
|
|
|
|
|
|
|
|
| |
| Type: |
|
| [ |
| ] |
| Select ATA/ATAPI | |
|
|
| AUTO |
| |||||
| Cylinders: |
| [13328] |
| drive installed | ||||
| Heads: |
|
| [ 15 ] |
| here. |
| ||
| Sectors: |
| [ 63 ] |
|
|
| |||
| Maximum Capacity: | [6449 MB] | [Auto] |
| |||||
|
|
|
|
|
|
|
| The BIOS | |
| the drive on boot | ||||||||
| LBA Mode Control: | [Enabled] | time. |
| |||||
| Transfer Mode: | [Fast PIO 4] |
|
| |||||
| DMA Mode: |
| [Ultra DMA 2] | Except [Auto] | |||||
|
|
|
|
|
|
|
| You enter parameters | |
|
|
|
|
|
|
|
| of the drive. | |
|
|
|
|
|
|
|
| [None] |
|
|
|
|
|
|
|
|
| The drive is | |
|
|
|
|
|
|
|
| disabled. |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| F1 Help | ↑↓ | Select Item | F9 Setup Defaults | |||||
| ESCExit | ←→ | Select Menu | Enter |
–Type
Set the type of IDE device. A value other than [Auto] requests the user to enter [Cylinders], [Heads], and [Sectors].
-Auto (Initial value)
The computer automatically sets the type of IDE device. Select this item when the
-None
Select when no IDE device is used.
-Hard Disk
Select for setting details on the hard disk drive.
-
Select when a
-
Select when a super disk is connected.
-Other ATAPI
Select when any other ATAPI device is connected.
Point
-To change the type, select with the space key.
-Usually, select [Auto]. If any other value is selected, set a correct value supported by the connected device, otherwise the computer may not access the device correctly.
For details, consult the manual included with the device.
–Maximum Capacity
This item displays the maximum capacity of the hard disk drive only when Type is [Auto] and [Hard Disk] is selected (if a hard disk unit is mounted).
34