
Mode
This item appears when ‘Parallel Port’ is [Enabled]. Set the operating mode of the parallel port.
-Output only
Select when connecting a peripheral unit using output mode only.
-
Select when connecting a peripheral unit using
-EPP
Select when connecting an EPP standard peripheral unit.
-ECP
Select when connecting an ECP standard peripheral unit.
I/O Address
This item appears when ‘Parallel Port’ is [Enabled]. Set the I/O address of the parallel port.
- 378 to 37F, 278 to 27F, 3BC to 3BF (Initial value: 378 to 37F)
Interrupt
This item appears when ‘Parallel Port’ is [Enabled]. Set the interrupt number of the parallel port.
- IRQ5, IRQ7 (Initial value: IRQ7)
DMA Channel
This item appears when ‘Mode’ is [ECP]. Set a DMA channel used to connect an ECP standard peripheral unit.
-DMA 1, DMA 3 (Initial value: DMA 1)
●Keyboard/Mouse Features
This submenu is used to set up the keyboard and mouse.
Move the cursor to this item and press the Enter key to display a submenu as shown below.
|
|
| PhoenixBIOS Setup Utility |
|
| |||||
| Main | Advanced | Security Power | Boot | Info | Exit | ||||
|
|
|
|
|
|
|
| |||
|
| Keyboard/Mouse Features |
| Item Specific Help |
| |||||
|
|
|
|
|
|
|
|
| ||
| Numlock: |
| [ |
| ] |
| Selects |
| ||
|
| ON |
|
| ||||||
| PS/2 Mouse: |
| [Enabled] |
| state for Numlock. |
| ||||
| USB Legacy Emulation: | [Auto] |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
F1 Help | ↑↓ | Select | Item | Value | F9 Setup Defaults | |
ESCExit | ←→ | Select | Menu | Enter Select |
40