Working with the notebook
CD/DVD indicator
The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when the drive is ready for reading. The indicator lights up when the drive is being accessed. You may only remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to flash, this means that the drive cannot access the data carrier.
Either the data carrier is damaged or dirty or you are using a data carrier that the drive cannot read.
Inserting or removing a data carrier
The notebook must be switched on.
2
1
►Push the insert/eject button (1). The drive tray will open.
►Gently pull the drive tray (2) completely out.
►Place the data carrier in the drive tray with the printed side facing upwards.
or
►Remove a data carrier that has been inserted.
►Push in the drive tray until you feel it lock into place.
34 | Fujitsu Technology Solutions |
