Working with the notebook
Wireless LAN / Bluetooth / UMTS
The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device.
Switching the wireless components on and off
►Press the key combination
Fn
+
F5
to start the WirelessSelector.
The wireless component indicator will illuminate when one or more wireless components are switched on.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna) will also be switched off when you switch off the wireless components.
Pay attention to the additional safety notes for devices with wireless components provided in the "Safety" manual.
Details on using a Wireless LAN can be found in the online help system included in the Wireless LAN software.
You can obtain more information on UMTS from your service provider.
Setting up WLAN access
•Requirement: A WLAN must be available and you must have the corresponding access information.
Information on configuring the WLAN access can be found in the documentation for your operating system.
Access via UMTS
If you have ordered an integrated UMTS module with your system, you can enjoy the best reception and maximum energy efficiency, without any disruptive cables or aerials. The optional UMTS module is ready for use immediately.
If you have not ordered a UMTS module, you can purchase the accessories for UMTS reception from specialised dealers or from your Fujitsu Technology Solutions dealer.
You will find information on establishing the connection with the UMTS network in the documentation for the hardware used.
Your device can connect with the Internet via UMTS. To do this, use one of the following types of connection:
•an integrated UMTS module (depending on your model variant)
•a USB dongle (a USB stick with your mobile phone provider’s SIM card)
•a UMTS ExpressCard (to be inserted in the ExpressCard slot of your device)
•a mobile
42 | Fujitsu Technology Solutions |
