C120-H007-05EN 91
1
If a low-voltage distribution cable that feeds power directly to devices or an interface
cable is to be laid outdoors, safeguards are needed to protect against possible
destruction caused by lightning surges.
If a device is damaged by a lightning, the direct cause is a surge (abnormal voltages
and currents). Lightning surges can be classified into four cases:
1Direct inflow of current into cables or devices caused by a direct lightning strike to
the cable or device or by a lightning strike to the ground.
2Generation of a surge voltage or current resulting from a large ground potential
difference between devices caused by lightning near any one of these devices or any
interconnecting cable.
3The induction of a current surge through a cable resulting from lightning near the
cable.
4The release of charge which has been captured by thunder cloud and accumulated
on a cable, and which flows as a surge.
Generally, the phenomena outlined 1 and 2 are called direct strikes, while those
outlined in 3 and 4 are called indirect strikes. Direct strikes have such a huge
destructive energy that protection against them is extremely difficult to achieve.
Indirect strikes, on the other hand, have by far a less destructive energy, and surge
absorbers will usually provide protection against them.
Protection, however, will not be available against surges that are beyond the
performance limits of the surge absorbers.