clio.book Page 51 Friday, June 2, 2006 10:37 AM

 

 

 

 

T r o u b l e s h o o t i n g

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

Possible Cause

 

Possible Solutions

 

 

 

 

 

 

 

 

 

 

 

 

 

The Optical Drive Access

The auto insertion function is

 

This is normal. However, you may disable this

 

indicator on the Status

active and is checking to see if

 

feature.

 

Indicator Panel blinks at

a disc is ready to run.

 

 

 

 

regular intervals when no

 

 

 

 

 

disc is in the tray or the

 

 

 

 

 

optical drive is not installed.

 

 

 

 

 

 

 

 

 

 

Port Replicator Problems

Note: Be sure to power down your LifeBook notebook before adding a printer to the Port Replicator parallel port.

LifeBook notebook does

Port Replicator AC adapter is

Provide power to the Port Replicator.

not turn on when installed

not plugged in.

 

in the optional Port

 

 

Notebook is not properly

Remove and re-dock your LifeBook notebook.

Replicator

seated in the Port Replicator.

 

 

 

 

 

 

Floppy Disk Drive Problems

 

 

 

 

 

You cannot access your

You tried to write to a write

Eject the floppy disk and set it to write enable.

floppy disk.

protected floppy disk.

(See Preparing a Disk for Use on page 38 for more

 

 

information)

 

 

 

 

Floppy disk is not loaded

Eject floppy disk, check orientation and re-insert.

 

correctly.

(See Ejecting a Disk on page 38 for more information)

 

 

 

 

The floppy disk drive may not

Remove and re-install your floppy disk drive.

 

be properly installed.

 

 

 

 

 

Security is set to protect access

Verify your password and security settings.

 

to floppy disk data.

 

 

 

 

Hard Drive Problems

 

 

 

 

 

You cannot access your

The wrong drive designator

Verify drive designator used by application is in

hard drive.

was used by an application

use by the operating system. When the operating

 

when a bootable CD-ROM was

system is booted from a CD, drive designations

 

used to start the notebook.

are automatically adjusted.

 

 

 

 

Security is set in the BIOS so

Verify your password and security settings.

 

your operating system cannot

 

 

be started without a password.

 

 

 

 

Keyboard or Mouse Problems

 

 

 

 

The built-in keyboard does

The notebook has gone into

Push the Power/Suspend/Resume button.

not seem to work.

Suspend mode.

 

 

 

 

 

Your application has locked

Try to use your integrated pointing device to restart

 

out your keyboard.

your system.

 

 

 

You have installed an

Your external device is not

Re-install your device. (See Device Ports on page 44

external keyboard or

properly installed.

for more information)

mouse, and it does not

 

 

Your operating system soft-

Check your device and operating system

seem to work.

ware is not set up with correct

documentation and activate the proper driver.

 

 

software driver for that device.

 

 

 

 

You have connected an

Your operating system soft-

Check your device and operating system

external keyboard or a

ware is not setup with correct

documentation and activate the proper driver.

mouse and it seems to be

software driver for that device.

 

locking up the system.

 

 

Your system has crashed.

Try to restart your notebook. I

 

 

 

 

51

Page 61
Image 61
Fujitsu C1410 manual Port Replicator Problems, Hard Drive Problems, Keyboard or Mouse Problems