Xii | Fujitsu E623 specification

Warning and Caution Labels

Your PC bears the warning and caution labels as shown below. The warning and caution labels must not be removed or damaged.

Rear of the PC main unit

DESKPOWER E623

MODEL FPC–E623

NRTL/C

100-127V (8.0A) /200-240V (4.0A) 50/60Hz

MADE IN SINGAPORE

By Fujitsu Limited, Japan (M)

WARNING

Electric shock

To prevent electric shock, switch off the PC and connected peripherals and unplug power cords from respective outlets before disassembling the unit and installing a built-in option.

Inside the PC main unit

WARNING

Electric shock To prevent electric shock and/or fire, do

not remove the cover of this unit, which includes a high voltage section.

WARNING

• Before mounting or dismounting an optional unit in/from your PC, switch off the PC and all connected units and unplug all power cords from respective outlets to prevent electric shock.

xii

Image 12

Fujitsu E623 user manual Xii

Contents

Deskpower E623 User’s Manual Important Safety Instructions Iii Before Reading this Manual For Safe Operation Using this Product for High-Safety Applications Backing Up the Data Microsoft Service Pack Conventions Used in this Manual IntroductionNotational conventions Safety Important NotesManufacturer’s notes Energy saving FCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorTransporting the PC Disposal and recycling Reference to products Xii Organization of This Manual Before Reading This Manual Contents Chapter Steps for Initial Setup Unpacking and Checking the DeliveryExternal devices Drives and boards Setting Up the PC Installing the Feet When two feet double are used Vertical positioning When one foot single is used Horizontal positioning Point Initial Switch-on Software will be Installed Switching on monitor and PC Operation Switching On the PC Switching Off the PC Power indicator Front Panels of the Main Unit of the Personal ComputerVent Smart card bay Disc access indicator Floppy disk access indicatorCD access indicator Microphone jack Back Panel of the Main Unit of the Personal Computer AGP card slot Antitheft lockKey hole for a padlock Expansion card slot Main switch OutletInlet LAN port Check that the upper cover has been firmly installed Anti-theft Protection and Lead-sealingPage Troubleshooting Tips Installing New Software Mains voltage supply is faultyInternal power supply overloaded Screen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Window XP Wrong RAM modules have been inserted Error Messages on the Screen Restoring the Hard Disk ContentsTime and/or Date is not Correct TipsPage System Expansion System Expansion Information about Boards How to remove the main unit cover Removing the Main Unit Cover Installing Memory Locations for memory to be installed Memory to be installedTable of combinations of memory Installing memory Page Install the flat cable into the CD-ROM drive Install the upper cover Installing the Expansion Card Locations for expansion cards to be installed Expansion cards to be installed Installing expansion cards Press and raise the slot cover lock Remove the slot cover Install the installing fitting Insert the expansion card into the port Replacing Lithium Battery