DIP Switch Settings
The factory default settings are as follows: 1 2 3 4 5 6 7 8
ON
OFF
|
| (*Note: the |
| indicates the switch position) |
DIP Switch Functions |
|
|
| |
SW No. | Function | ON state / OFF state | ||
1 | Hot Key Mode: | ON: enabled / OFF: disabled | ||
| <Ctrl>+<Alt>+<Shift> and |
|
|
|
|
|
|
| |
2 | Hot Key Mode: Double <Ctrl> | ON: enabled / OFF: disabled | ||
3 | Hot Key Mode: Double <Scroll | ON: enabled / OFF: disabled | ||
| Lock> |
|
|
|
4 | Country Setting bit 1 | (see following table) | ||
5 | Country Setting bit 2 | (see following table) | ||
6 | Country Setting bit 3 | (see following table) | ||
7 | Country Setting bit 4 | (see following table) | ||
8 | Power Mode Setting | ON: the switch device is always ON. | ||
|
| OFF: the switch device turns ON if any | ||
|
| connected host is turned ON. | ||
The country code (language) settings are as follows: For Sun Microsystems plat home only
| Country Setting | SW4 | SW5 | SW6 | SW7 |
|
| JPN | ON | ON | ON | ON |
|
| USA | ON | ON | ON | OFF |
|
|
|
|
|
|
|
|
| GBR | ON | ON | OFF | ON |
|
| GER | ON | ON | OFF | OFF |
|
| FRA | ON | OFF | ON | ON |
|
| ESP | ON | OFF | ON | OFF |
|
| SWE | ON | OFF | OFF | ON |
|
| POR | ON | OFF | OFF | OFF |
|
| TPE | OFF | ON | ON | ON |
|
| KOR | OFF | ON | ON | OFF |
|
| ITA | OFF | ON | OFF | ON |
|
| UNIX | OFF | ON | OFF | OFF |
|
| NOR | OFF | OFF | ON | ON |
|
| BEL | OFF | OFF | ON | OFF |
|
| DEN | OFF | OFF | OFF | ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
