●Only licensed personal can uncouple, remove or switch parts (such as
●Only the resolution and refresh rate specified in the monitor explanation in [Technical Specifications] can be used as incorrect settings may damage the monitor. Contact your place of purchase or a Fujitsu maintenance person if you have any questions.
●To prevent interference it is necessary to adequately isolate the data cables connected to peripheral equipment.
●Unplug the power plug from the grounded power outlet if there is a power outage.
●Follow the instructions in the appropriate section in [Operation] when cleaning server.
●Do not use the Console Drawer as a foot rest or lean against it with it drawn out. Doing so may unbalance the rack, causing it to fall over.
●Keep this manual handy for reference with the Console Drawer at all times.
CAUTION
Safety Instructions
Read the “Safety Instructions” before use to ensure proper use of this product. Safety Instructions contained in this section are written for the user to avoid any damage to property or
●Verify that the power to the server is off before handling any connectors. Also, be sure to discharge any static electricity. Connecting or disconnecting the connectors while carrying a static charge or while the power to the server is on may damage the server or this device. Note that damage of this kind is not covered by the warranty.
●Only PC/AT compatible servers can be hooked up to this device, and each server must be equipped with the following type of keyboard, mouse and monitor connectors. Other types are not supported. Additionally, a PS/2 keyboard and mouse can not be connected at the same time as a Sun keyboard.
Compatible PC/AT connectors:
-Mini DIN 6P female (1 each for PS/2 keyboard and PS/2 mouse)
-USB
-Mini
●Connecting the server requires special optional cables (for PS/2, and 1.8 m, 3 m and 5 m USB cables). The maximum cable length is 5 meters. Use a 1.8 meter cable for cascaded connections. Please note that cables longer than specified are not covered by the warranty.
●Use of standard equipment is recommended because special keyboards (programmable, wireless) and mice (wireless or that require a special driver) may not be supported/operate
●The keyboard connector for this switch device is a PS/2 type (Mini DIN 6P female), but you can connect an
●The mouse connector for the switch device is exclusively for PS/2 connection (Mini DIN 6P female). A serial or
5
