Repositioning the Shipping Lock

To keep the scanner from being damaged during shipping, the carrier unit is fixed with a Shipping Lock. After placing the carrier unit where it will be installed, change the position of this Shipping Lock as explained below.

1Place the image scanner on the edge of the desktop so that the left side of the scanner (where the ADF is attached) extends from the desktop. Do not set the image scanner upside down or on its side.

CAUTION

Do not let the scanner hang more than 20 cm (8 in.) over the edge of the desk.

Good

less than 20 cm (8 in.)

BadBad

2 Remove the shipping lock from position A . Then, install the shipping lock at position B .

Front side

Bottom view

 

Shipping Lock

 

(Position for storage,

ADF side

position for shipment)

 

Enlarged section A

 

Front side

Enlarged

Shipping Lock (Position for operation)

B

A

Shipping Lock (Position for shipment)

CAUTION

Before moving or storing the scanner, make sure that the shipping lock is set to the shipment position to prevent possible damage. Before setting the shipping lock, make sure that the carrier has been returned to the home position.

2-3

Page 28
Image 28
Fujitsu fi-4750L manual Repositioning the Shipping Lock