Activating the Setup Mode
This section describes how to activate the setup mode.
<Screen M1>
1Turn the power On. Then the scanner displays “Scanner Ready” on the LCD.
<Screen M2>
2If the scanner does not have a video interface
option, go to the procedure step 3. Press 
then the scanner with the video interface option displays Screen M2.
<Screen M3>
3Press 
then the scanner displays
Screen M3.
<Screen M4>
4Press 
then the scanner displays
Screen M4.
5Press 
. Now the scanner is at Screen 41 (page
NOTICE
Any time you press 
, you can return to the “Scanner Ready” screen.
