15. Display the TPS Board ID Number

<Screen 55> (An Example)

1Press “Next” or “Previous” and let the

scanner display Screen 55.

The scanner displays the ID number if the applicable board is installed.

NOTICE

If the Fujitsu video Interface Option board is installed properly, the display shows “ID=7”.

2Press to return.

16. Select Built-In/IPC-4D Image Processing

<Screen 56>

1Press ”Next” or and let the scanner

display the Screen 56.

2At Screen 56, press or to select ”Standard” or ”IPC-40”.

When ”Standard” is selected, the scanner uses its built-in image processing. On the other hand, the scanner selects the image processing of the IPC-4D when the ”IPC-4D” is installed and selected.

NOTICE

The factory default is ”Standard”.

NOTICE

fi-4750L has built-in Image Processing. The following image processing is supported both by the fi-4750L and the IPC-4D. As a default, the scanner built-in functions are enabled. By setting "On" using the Operator Panel, the IPC-4D image processing overrides the built-in functions.

 

Image Processing

IPC-4D

M4097D

 

 

 

 

1

Emphasis/Smoothing

5 x 5 matrix

3 x 3 matrix

2

Outline

Pre-threshold Laplacian

Laplacian

 

 

 

 

3

Simplified Dynamic Threshold

IPC-2 like SDTC

3 x 3 max-min

 

 

 

 

The IPC-4D support of those functions is intended for compatibility with the IPC-3/3D. The matrix size used in the IPC-4D is larger than the one in the fi-4750L. The fi-4750L Built-in Dynamic Threshold is a new algorithm.

7-13

Page 81
Image 81
Fujitsu fi-4750L manual Display the TPS Board ID Number, Select Built-In/IPC-4D Image Processing, M4097D