■Indications on the Function Number Display

The following shows the indications on the Function Number Display.

No.

Descriptions

 

 

8

Lights only one time upon turning on the scanner.

P

Indicates that the scanner has been turned ON and

 

is being initialized.

0

Indicates that initialization will soon be com-

 

pleted.

1

Indicates that initialization has been completed

 

successfully.

 

This status is called "Ready Status".

 

 

U

Indicates that a temporary error (that users can

 

solve) has occurred during the initialization or

 

scanning of documents.

 

"U" and an error number (0, 1, 9) are displayed

 

alternately. Refer section "Temporary error" on

 

page. AP-3.

 

To return the scanner to the ready status ("1"),

 

press the "Scan" or "Send to" button while the

 

error is indicated. Refer section "Temporary error"

 

on page. AP-3.

E

Indicates that a device alarm (that users can not

 

solve) has occurred during the initialization or

 

scanning of documents.

 

"E" and an alarm number (0, 2 ,7, b, c, d) are indi-

 

cated alternately.

 

To return the scanner to the ready status ("1"),

 

press "Scan" or "Send to" button.

 

If this alarm occurs, turn the power off and then on

 

again. If the alarm is indicated after turning on the

 

power again, contact your service engineer.

2