7.Follow the instructions on the window to install the application.

8.When the [InstallShield Wizard Complete] window appears, click [Finish].

Your computer will be restarted. Do not remove the Setup CD-ROM from the CD drive until your PC has completely restarted.

Now the installation of the scanner driver is completed.

■Installing QuickScan Pro™(Trial)

"QuickScan Pro™ (Trial)" is an image capturing software that complies with the ISIS standard.

ATTENTION

• When using Windows 2000 or Windows

 

XP, log on as a user with "Administrator"

 

privileges.

1.Insert the Setup CD-ROM into a CD drive.⇒<SETUP DISK STARTUP SCREEN> appears.

2.Click [INSTALL PRODUCTS].

5.Enter the required information, then click [Next >] button.
3.Click [QuickScan PRO (Trial)] on the window below.

ATTENTION

"QuickScan Pro™" included in the Setup CD-ROM is a trial version. For further use after the expiration of its trial period of up to 30 launches, it is necessary to purchase a fully functional version of QuickScan Pro™. (When you install the trial version, do not change the Serial Number already displayed.)

4.Continue to install the application following the instructions on the window.
6.Install the application following the instructions on the window.Error Recovery Guide

Error Recovery Guide is a software that displays troubleshooting information on screen if any scanner error occurs.

If you did not install together the Error Recovery Guide with the driver, please proceed with the procedures given below for installing it.

1.Insert the Setup CD-ROM in your CD drive. The <SETUP DISK STARTUP SCREEN> will appear.

6