6.When the [InstallShield Wizard Complete] win- dow appears, click [Finish].

3. Click [INSTALL PRODUCTS].

4. Click [ISIS Driver] on the window below.

ATTENTION

For finishing the installation, it may be necessary to restart your computer. Follow the instructions on the window.

For FUJITSU ISIS Scanner Driver

■Preparation

Take out the Setup CD-ROM from its package, but do not insert the Setup CD-ROM into the CD drive yet.

■Installing the FUJITSU ISIS Scanner Driver

5. Error Recovery Guide Installation window

appears.

Error Recovery Guide is a software that dis-

plays troubleshooting information on screen if
any scanner error occurs. Although this soft-
ware’s installation is highly recommended, it
can be installed later if you do not install it in

ATTENTION

Windows XP screenshots are used in this section as examples. The windows and operations may vary slightly depending on your OS.

this step.

ATTENTION

When you select [Yes] for installing Error

1. Turn your PC on and log on to Windows.

Recovery Guide, the [Choose Setup Lan- guage] window appears. Select a language and follow the instructions on the window. The Error Recovery Guide will automatically continue finishing its installa-

ATTENTION

When using Windows 2000 or Windows XP, log on as a user with "Administrator" privileges.

tion. Please wait until the installation of ISIS driver automatically starts.

2.Insert the "Setup CD-ROM" into the CD drive.

⇒<SETUP DISK START UP SCREEN> appears.

6.Select a language used for installation on [Choose Setup Language] window and click [OK].

ATTENTION

This screen may not appear when the "Autoplay" setting of your PC is OFF. In this case, run "Install.exe" in this CD-ROM directly from the "Explorer" or "My Com- puter".

fi-5015C Image Scanner Getting Started

 

5