Chapter2 INSTALLATION OF THE SCANNER
2.1Installing the Scanner Application
■Installing the FUJITSU TWAIN32 Scanner Driver
For scanning documents with this scanner, both scanner driver and image capturing application software (called "application" hereafter) must be installed on your PC.
The following scanner drivers and applications are pro- vided:ATTENTION
Windows XP screenshots are used in this section as examples. The windows and operations may slightly vary depending on
your OS.
• | Scanner Driver: |
| FUJITSU TWAIN 32 Scanner Driver |
| FUJITSU ISIS Scanner Driver |
• | Scanning application: |
ScandAll 21 (for FUJITSU TWAIN 32) |
QuickScan ProTM (Trial) (for FUJITSU ISIS ) |
ATTENTION
When using Windows 2000 or Windows XP, log on as a user with "Administrator" privileges.
Install the appropiate scanner driver for the application you will use. The following sections describe installation of each driver and application.
ATTENTION
Please install the scanner driver before connecting the scanner to your PC.
If you connect the scanner before installing the scanner driver, the scanner will not operate correctly.
If you have connected the scanner before- hand, the "Found New Hardware Wizard" screen appears (this screen might differ slightly according to the used OS) . On this
ATTENTION
This screen may not appear when the "Autoplay" setting of your PC is OFF. In this case, run "Install.exe" in this
screen, click the [Cancel] button to close the Wizard screen and install the scanner driver first.
■Preparation
Confirm the following items before installing the appli- cation.•Take out the Setup
ATTENTION
Uninstall [Scanner Utility for Microsoft Win- dows] from [Add/Remove Programs] of the control panel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|