4.Connect the ADF cable to the ADF cable con- nector on the scanner, and secure it with screws.

2.3Connecting the Scanner to Your PC

Follow the procedure below to connect the USB cable.1.Connect the USB interface cable to the USB interface connector.

Screw

5. Connect the AC adapter.
2.Connect the other end of the USB interface cable to the PC.

ATTENTION

Use only the AC adapter provided by the manufacturer.

ATTENTION

• Be sure to use the USB cable which

 

comes as an accessory with this scan-

 

ner. Correct operation with commercially

 

available cables is not guaranteed.

1) Connect the AC cable to the AC adapter.

•When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use the second or later hub stages, the scanner may not operate correctly.

•If you connect the scanner with USB 2.0, it is required that the USB port and Hub are compliant with USB 2.0. The scan- ning speed may slow down if it is con- nected with USB1.1.

2)Connect the AC adapter connector to the scanner’s DC inlet.3) Plug the AC cable into the outlet.

The Function Number Display and the LED

HINT

may flash for an instant when plugging the

 

 

AC cable into the outlet.

3.Press the "I" side of the main power switch to turn on the scanner.4.Press the power button to turn ON the scanner.Your scanner will be automatically detected. For Windows 98:

When a request for inserting the CD-ROM for Windows 98 appears, insert it into the CD drive and click the [OK] button.

For Windows 2000:When [Digital Signature not Found] appears, click [Yes].The installation of the scanner is completed.

10