3.5 Various settings according to your needs
■Scanning only one side of a document
SCAN
As the default setting, pushing [SCAN] button 
on ScanSnap product starts scanning docu-
ments in "Duplex" mode. If you wish to start "Simplex" scanning by pressing the [SCAN] button, please change the settings following the procedure below.
Operation 
1.Right click the "ScanSnap Manager" icon S on the task tray and select "Setting" from the menu.
2. Click [Scanning] tab and select [Simplex scan] at [SCAN button:].
3
Operations Scanner Basic
3.Click [OK] button to close the window.
4.Load the document onto the scanner.
SCAN
5.Press the [SCAN] button 
.
⇒The document is scanned in the "Simplex" mode.
HINT
To return the setting to the "Duplex" mode, select [Duplex scan] in step 2 above. The selected setting is applied to further scans unless it will be changed again.
ScanSnap |
| 53 |
|