Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu fi-5530C Chapter2 INSTALLATION OF THE SCANNER, 2.1 Installing the Scanner, 2.2Connecting the Scanner to Your PC, 3. Connect the AC adapter

1 28

Download 28 pages, 1.31 Mb

Chapter2 INSTALLATION OF THE SCANNER

2.1 Installing the Scanner

1. Place the scanner at its installation site.

For details on the scanner's dimensions and required installation space, refer to the fi-5530C Operator’s Guide "7.2 Installation Specifications" on the Setup CD-ROM.

2. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into the corresponding slots in the scanner as shown in the figure below.

The Side guides of the ADF paper chute have to face up.

ADF paper chute

Tab

Side guide

3) Plug the AC cable into the outlet.

The Function Number Display and the LED

HINT	may flash for an instant when plugging the
	may flash for an instant when plugging the
	AC cable into the outlet.

2.2Connecting the Scanner to Your PC

When running Windows 95 or Windows NT 4.0, connect the scanner with the SCSI interface cable.

When running Windows 98, Windows Me, Windows 2000, or Windows XP, connect either with the USB interface cable or the SCSI interface cable.

3. Connect the AC adapter.

ATTENTION

This scanner is provided with two inter- faces: Ultra SCSI and USB 2.0 /1.1. Connect only one of the USB or SCSI interface cable. Windows 95 and Windows NT 4.0 do not support USB interface.

ATTENTION

Use only the AC adapter provided by the manufacturer.

■Connecting with the USB Interface Cable

1) Connect the AC cable to the AC adapter.2)Connect the AC adapter connector to the scan- ner’s DC inlet.

1.Connect the USB interface cable to the USB interface connector.

fi-5530C Image Scanner Getting Started		3

Contents

Page Page CONTENTS ■ Regulatory Information ■ Note, Liability ■ Safety Precautions Chapter1 INTRODUCTION ■Regulatory Information ■Note, Liability Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho ■Safety Precautions Do not install the scanner on unstable surfaces Do not block the ventilation ports Do not place heavy objects or stand on top of the scanner Firmly insert the power plug Avoid any contact when scanner is in use Chapter1 PREPARING THE SCANNER 1.1Checking the Contents of the Scanner Package 1.2 Names of Parts 1.3 Operator panel Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 2.2Connecting the Scanner to Your PC 2.Connect the other end of the USB interface cable to your PC 2. Connect the other end of the cable to your PC ■ Connecting with the SCSI Inter face Cable •SCSI interface cable: 2.3Installing the Scanner Application 5. Click [INSTALL PRODUCTS] 6. Click [TWAIN Driver] on the window below 9.Install the application following the instructions on the window 10.When the [InstallShield Wiizard Complete] win- dow appears, click [Finish] 7. Error Recovery Guide Installation window 2. Click [INSTALL PRODUCTS] 3. Click [ScandAll 21] on the window below ■Confirming Installation 1. Load the documents on the scanner 2. Start ScandAll21 • Connect the scanner correctly to your PC ■Installing the FUJITSU ISIS Scanner Driver 2.Turn on your PC and log on to Windows For FUJITSU ISIS Scanner Driver 4.Insert the "Setup CD-ROM"into the CD drive CD-ROMfrom the CD drive until your PC has completely restarted 6. Click [ISIS Driver] on the window below The installation of the scanner driver is completed ■Installing QuickScan ProTM plays troubleshooting information on screen if 3.Click [QuickScan PRO (Trial)] on the window below 4.Continue to install the application following the instructions on the window 5. Enter required information, then click [Next >] 6.Install the application following the instructions on the window 2. Start QuickScan ProTM Error Recovery Guide Image Processing Software Option (Trial) Adobe® Acrobat® 3. Select "Install Adobe Acrobat 4.Click the [Next] button. The set up window appears 1.Insert the Adobe Acrobat CD-ROMinto the CD-ROMdrive ⇒The "Adobe Acrobat" window appears ■Uninstalling Supplied Programs Follow the procedure below to uninstall supplied pro- grams 1. Start up your PC 2.Exit all currently running programs 3.Select [Control Panel] - [Add or remove Pro- grams] from the [Start] menu 5.Click the [Change/Remove] or [Remove] but- ton 6.When the confirmation dialogbox appears, Click the [OK] or [Yes] button ⇒This executes the uninstallation Appendix1 TROUBLESHOOTING Appendix1 AP-1 AP-2 AP-3 Appendix2 DAILY CARE Appendix3 REPLACING CONSUMABLES Appendix3 AP-5 fi-5530CImage Scanner Getting Started P3PC-1342-02EN