Fujitsu fi-5530C 2.3Installing the Scanner Application, ■Preparation, FUJITSU TWAIN32, FUJITSU TWAIN32, •Scanner Driver:, Take out the Setup, •Scanning application:

2.3Installing the Scanner Application

For scanning documents with this scanner, both scanner driver and image capturing application software (called "application" hereafter) must be installed on your PC.

The following scanner drivers and applications are pro- vided:•Scanner Driver:FUJITSU TWAIN 32 Scanner Driver FUJITSU ISIS Scanner Driver•Scanning application:ScandAll 21 (for FUJITSU TWAIN 32) QuickScan ProTM (for FUJITSU ISIS)

Install the appropiate scanner driver for the application you will use. The following sections descri be installation of each driver and application.

FUJITSU TWAIN32 V8•When using Windows 95 or Windows NT 4.0:

ASPI Manager V4.01 or later is required (gener- ally comes with SCSI board products).

■Installing the FUJITSU TWAIN32 Scanner Driver

Windows XP screenshots are used in this

HINT	section. The windows and operations may
	section. The windows and operations may
	slightly vary depending on your OS.

1.Press the power button to turn ON the scanner.2.Turn on your PC and log on to Windows.

For FUJITSU TWAIN32 Scanner Driver■Preparation

ATTENTION

When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges.

Confirm the following items before installing the appli- cation.

•Take out the Setup CD-ROM from its pack- age, but do not insert the Setup CD-ROM into the CD driver yet.

•Connect the scanner correctly to your PC.

For details on how to connect the scanner,

HINT	refer to "2.2 Connecting the Scanner to
	refer to "2.2 Connecting the Scanner to
	Your PC" on page 3.

•Uninstall any older versions of FUJITSU TWAIN 32 driver if it has already been installed.

3.If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. Click [Cancel] to close the Wizard win- dow.

ATTENTION

Uninstall [Scanner Utility for Microsoft Win- dows] from [Add/Remove Programs] on the control panel.

4.Insert the Setup CD-ROM into the CD drive.⇒<SETUP DISK START UP SCREEN> appears.

•There are two types of FUJITSU TWAIN 32:

One of the following driver software will be automatically installed according to your Oper- ating System (OS).

For Windows 98, Windows Me, Windows 2000, and Windows XP:

FUJITSU TWAIN32 V9

For Windows 95, Windows NT 4.0:

ATTENTION

This screen may not appear when the "Autoplay" setting of your CD drive is off. In this case, run "Install.exe" in this CD- ROM directly from "Explorer" or "My Com- puter".

fi-5530C Image Scanner Getting Started		5