
6.Set scanning resolution, document size, etc. on the [TWAIN driver] window (for setting details of scanning) and click the [Scan] button.
HINT
For details on how to connect the scanner, refer to "2.2 Connecting the Scanner to Your PC" on page 3.
HINT
Windows XP screenshots are used in this section as examples. The windows and operations may vary slightly depending on your OS.
For details on [TWAIN driver], refer to the
HINT | "FUJITSU TWAIN32 Scanner Driver Help" |
| |
| provided on the Setup |
1.Press the power button to turn ON the scanner.
2.Turn on your PC and log on to Windows..7.Documents are scanned, and the generated images are displayed on the [ScandAll 21] win- dow.
ATTENTION
When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges.
If the scanning is completed without any troubles, the installation was performed successfully.
For details on various types of scanning, refer to the
3.If the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. Click [Cancel] to close the Wizard win- dow.
■Preparation
⇒<SETUP DISK START UP SCREEN> appears.
Confirm the following items before installing the appli- cation.
•Take out the Setup
ATTENTION
This screen may not appear when the "Autoplay" setting of your CD drive is off. In this case, run "Install.exe" in this CD- ROM directly from "Explorer" or "My Com- puter".
8