Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu fi-5530C AP-3, •"U1" error, •"U2" error, •"U6" error, ■Temporary error, 1.Remove jammed documents, ■Device alarm (Permanent error)

1 28

Download 28 pages, 1.31 Mb

■Temporary error

Indication	Meaning

U1	A paper feed error occurred.
U2	A multi feed error occurred.

U6	The print cartridge is not set.

The following shows the procedure for releasing of each temporary error.

•"U1" error

1.Remove jammed documents.

(Refer to fi-5530C Operator’s Guide "5.1 Removing Jammed Documents" on the Setup CD-ROM..)

2.Confirm that the documents meet the paper conditions for scanning.

(Refer to fi-5530C Operator’s Guide "6.2 Doc- ument Quality" on the Setup CD-ROM.)

•"U2" error

Press the [Send to] button on the Operator Panel. The papers that were multi fed will be ejected.

•"U6" error

This is a temporary error related with the Imprinter option (sold separately). For details refer to 553PR Operator's Guide, chapter "5 Error Message".

■Device alarm (Permanent error)

Indication	Meaning

E2	Trouble in the optical system (front).
E3	Trouble in the optical system (back).

E4	The motor fuse has blown out.

E6	Trouble in the operator panel.

E7	Trouble occurred in the internal memory
	(EEPROM).
E8	The SCSI interface fuse has blown out.

E9	An error in the image memory.

Ec	An alarm in the memory.

Ed	Trouble in the SCSI interface controller.

EF	A trouble in the Background switching
	mechanism.

When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function Number Display, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.

fi-5530C Image Scanner Getting Started		AP-3

Contents

Page Page CONTENTS ■ Regulatory Information ■ Note, Liability ■ Safety Precautions Chapter1 INTRODUCTION ■Regulatory Information ■Note, Liability Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho ■Safety Precautions Do not install the scanner on unstable surfaces Do not block the ventilation ports Do not place heavy objects or stand on top of the scanner Firmly insert the power plug Avoid any contact when scanner is in use Chapter1 PREPARING THE SCANNER 1.1Checking the Contents of the Scanner Package 1.2 Names of Parts 1.3 Operator panel Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 2.2Connecting the Scanner to Your PC 2.Connect the other end of the USB interface cable to your PC 2. Connect the other end of the cable to your PC ■ Connecting with the SCSI Inter face Cable •SCSI interface cable: 2.3Installing the Scanner Application 5. Click [INSTALL PRODUCTS] 6. Click [TWAIN Driver] on the window below 9.Install the application following the instructions on the window 10.When the [InstallShield Wiizard Complete] win- dow appears, click [Finish] 7. Error Recovery Guide Installation window 2. Click [INSTALL PRODUCTS] 3. Click [ScandAll 21] on the window below ■Confirming Installation 1. Load the documents on the scanner 2. Start ScandAll21 • Connect the scanner correctly to your PC ■Installing the FUJITSU ISIS Scanner Driver 2.Turn on your PC and log on to Windows For FUJITSU ISIS Scanner Driver 4.Insert the "Setup CD-ROM"into the CD drive CD-ROMfrom the CD drive until your PC has completely restarted 6. Click [ISIS Driver] on the window below The installation of the scanner driver is completed ■Installing QuickScan ProTM plays troubleshooting information on screen if 3.Click [QuickScan PRO (Trial)] on the window below 4.Continue to install the application following the instructions on the window 5. Enter required information, then click [Next >] 6.Install the application following the instructions on the window 2. Start QuickScan ProTM Error Recovery Guide Image Processing Software Option (Trial) Adobe® Acrobat® 3. Select "Install Adobe Acrobat 4.Click the [Next] button. The set up window appears 1.Insert the Adobe Acrobat CD-ROMinto the CD-ROMdrive ⇒The "Adobe Acrobat" window appears ■Uninstalling Supplied Programs Follow the procedure below to uninstall supplied pro- grams 1. Start up your PC 2.Exit all currently running programs 3.Select [Control Panel] - [Add or remove Pro- grams] from the [Start] menu 5.Click the [Change/Remove] or [Remove] but- ton 6.When the confirmation dialogbox appears, Click the [OK] or [Yes] button ⇒This executes the uninstallation Appendix1 TROUBLESHOOTING Appendix1 AP-1 AP-2 AP-3 Appendix2 DAILY CARE Appendix3 REPLACING CONSUMABLES Appendix3 AP-5 fi-5530CImage Scanner Getting Started P3PC-1342-02EN