Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu fi-5530C appears, this step, ■Installing ScandAll, 5. Click [INSTALL PRODUCTS], <SETUP DISK START UP SCREEN> appears, ⇒<SETUP DISK START UP SCREEN> appears

1 28

Download 28 pages, 1.31 Mb

5. Click [INSTALL PRODUCTS].6. Click [TWAIN Driver] on the window below.

9.Install the application following the instructions on the window.10.When the [InstallShield Wiizard Complete] win- dow appears, click [Finish].

Your computer will be restarted and the scanner will be detected. Do not remove the Setup CD-ROM from the CD drive until your PC has completely restarted.

7. Error Recovery Guide Installation window

appears.

Error Recovery Guide is a software that dis-

plays troubleshooting information on screen

when any scanner error occurs. Although this

ATTENTION

Depending on the OS, the following operations may be necessary.

For Windows 98:

When a request for inserting the CD-ROM of Windows 98 appears, insert it into the CD drive and click [OK].

For Windows 2000:

When [Digital Signature not Found] appears, click [Yes].

software’s installation is highly recommended,

it can be installed later if you do not install it in

this step.

Installation of the scanner driver is completed.

ATTENTION

To confirm whether the installation was

ATTENTION

When you select [Yes] for installing the Error Recovery Guide, [Choose Setup Lan- guage] window appears. Select a language and follow the instructions on the window. Error Recovery Guide will automatically continue finishing its installation. Please wait until the installation of TWAIN driver automatically starts.

successful, perform a scanning operation with an application that complies with the TWAIN standards such as ScandAll 21.

■Installing ScandAll 21

"Scandall 21" is an image capturing software that complies with the TWAIN standard.

8.Select a language used for installation on [Choose Setup Language] window and click [OK].

ATTENTION

When using Windows NT 4.0, Windows 2000 or Windows XP, log on as a user with "Administrator" privileges

1.Insert the Setup CD-ROM into a CD drive.

⇒<SETUP DISK START UP SCREEN> appears.

6

Contents

Page Page CONTENTS ■ Regulatory Information ■ Note, Liability ■ Safety Precautions Chapter1 INTRODUCTION ■Regulatory Information ■Note, Liability Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Products Group Solid Square East Tower, 580 Horikawa-cho ■Safety Precautions Do not install the scanner on unstable surfaces Do not block the ventilation ports Do not place heavy objects or stand on top of the scanner Firmly insert the power plug Avoid any contact when scanner is in use Chapter1 PREPARING THE SCANNER 1.1Checking the Contents of the Scanner Package 1.2 Names of Parts 1.3 Operator panel Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 2.2Connecting the Scanner to Your PC 2.Connect the other end of the USB interface cable to your PC 2. Connect the other end of the cable to your PC ■ Connecting with the SCSI Inter face Cable •SCSI interface cable: 2.3Installing the Scanner Application 5. Click [INSTALL PRODUCTS] 6. Click [TWAIN Driver] on the window below 9.Install the application following the instructions on the window 10.When the [InstallShield Wiizard Complete] win- dow appears, click [Finish] 7. Error Recovery Guide Installation window 2. Click [INSTALL PRODUCTS] 3. Click [ScandAll 21] on the window below ■Confirming Installation 1. Load the documents on the scanner 2. Start ScandAll21 • Connect the scanner correctly to your PC ■Installing the FUJITSU ISIS Scanner Driver 2.Turn on your PC and log on to Windows For FUJITSU ISIS Scanner Driver 4.Insert the "Setup CD-ROM"into the CD drive CD-ROMfrom the CD drive until your PC has completely restarted 6. Click [ISIS Driver] on the window below The installation of the scanner driver is completed ■Installing QuickScan ProTM plays troubleshooting information on screen if 3.Click [QuickScan PRO (Trial)] on the window below 4.Continue to install the application following the instructions on the window 5. Enter required information, then click [Next >] 6.Install the application following the instructions on the window 2. Start QuickScan ProTM Error Recovery Guide Image Processing Software Option (Trial) Adobe® Acrobat® 3. Select "Install Adobe Acrobat 4.Click the [Next] button. The set up window appears 1.Insert the Adobe Acrobat CD-ROMinto the CD-ROMdrive ⇒The "Adobe Acrobat" window appears ■Uninstalling Supplied Programs Follow the procedure below to uninstall supplied pro- grams 1. Start up your PC 2.Exit all currently running programs 3.Select [Control Panel] - [Add or remove Pro- grams] from the [Start] menu 5.Click the [Change/Remove] or [Remove] but- ton 6.When the confirmation dialogbox appears, Click the [OK] or [Yes] button ⇒This executes the uninstallation Appendix1 TROUBLESHOOTING Appendix1 AP-1 AP-2 AP-3 Appendix2 DAILY CARE Appendix3 REPLACING CONSUMABLES Appendix3 AP-5 fi-5530CImage Scanner Getting Started P3PC-1342-02EN