Symptom

Check this item

Remedy

 

 

 

Paper is not fed (pick error

Do the documents satisfy the "Docu-

Use the documents that satisfy the "Document

occurs frequently, or docu-

ment Quality" and the "Multi feed

Quality" and the "Multi feed Detection Condi-

ment stops midway).

Detection Conditions" in the chapter 6

tions" in the chapter 6 of the fi-5530C Operator’s

 

of the fi-5530C Operator’s Guide?

Guide.

 

Is the Pick roller dirty?

Clean the Pick roller. Refer to the Operator's

 

 

Guide "3.2. Cleaning the ADF".

 

Is the Pick roller worn out?

Clean the Pick roller. Refer to the Operator's

 

 

Guide "4.3. Replacing the Pick Roller".

 

Is there any debris on the document feed

Remove any debris from the document feed path.

 

path?

 

The generated images are

Are the Feed rollers dirty?

Clean the Feed rollers. Refer to the Operator's

elongated.

 

Guide "3.2. Cleaning the ADF".

 

Have you adjusted the scan scale?

For Windows 98, Windows Me, Windows 2000,

 

 

WindowsXP, select "Scanners and Cameras" in

 

 

the control panel, then click the [Device Set] tab

 

 

to adjust scale.

 

 

For Windows 95, Windows NT 4.0, right click the

 

 

Scanner Control Center in the task tray, select

 

 

[Options] and adjust the scan scale.

 

 

 

There is a shadow on the

Are the Feed rollers dirty?

Clean the Feed rollers. Refer to the Operator's

leading edge of the gener-

 

Guide "3.2. Cleaning the ADF".

ated image?

 

 

Have you adjusted the offset (the scan-

For Windows 98, Windows Me, Windows 2000,

 

 

ning starting position)?

WindowsXP, adjust the [Sub-scan Setting] on

 

 

[Scanners and Cameras] in the control panel.

 

 

For Windows 95, Windows NT 4.0, right click the

 

 

Scanner Control Center, select [Options]-[Sub-

 

 

scan Setting] and adjust the offset.

AP-2