Fujitsu fi-5530C2 6.5Specifying How to Detect Multifeed, FOR, ADF, fi-5530C2, ■ Check length, SPECIFICATIONS, ■ Check overlapping, Image Scanner Operator’s Guide

fi-5530C2 Image Scanner Operator’s Guide

The following describes what condition is required for each selection:

6.5 Specifying How to Detect Multifeed

6.5Specifying How to Detect Multifeed

One of the following is selected to detect a multifeed:

•Check overlapping

•Check length

•Check overlapping and length

■ Check overlapping

Paper weight		52 g/m2 - 127 g/m2 (13.9 lb to 34.0 lb)	DOCUMENT
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.
■ Check length			SPECIFICATIONS
Document length deviation		1% or less
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
■ Check overlapping and length
Paper weight		52 g/m2 - 127 g/m2 (13.9 lb to 34.0 lb)
Document length deviation		1% or less	FOR
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.
			ADF
	Multifeed detection by overlap will often mis-detect very thick paper or
ATTENTION			6
	plastic document.
	When scanning documents like this, please disable the multifeed
	detection.

139