Fujitsu fi-5530C2 2.3Scanning Thin Documents, "Thin, "Normal, Paper Thickness Switch, "6.2 Document Quality" on page, "1.3 Scanning Documents" (page 10)

2.3Scanning Thin Documents

When you scan a batch of thin documents (which are out of specifications with under 52g/m² of thickness), document jams (Multifeed) and mis-picking may occur. If you have to scan such docu- ments, switch the lever to "Thin" side.

1.Make sure that the thin documents meet the requirements described in section "6.2 Document Quality" on page 133.

2.Shift the position of the paper thickness switch to the "Thin" position (the factory default is "Normal" position).

Paper Thickness Switch"Normal""Thin"

3.Scan the documents, following the procedure in section "1.3 Scanning Documents" (page 10).

For information about how to scan documents, refer to section "1.5 How to Use ScandAll PRO" on page 29.

ATTENTION

Move the Paper Thickness Switch to "Normal" position when scanning documents of standard thickness. Move the switch to "Thin" position only when you scan thin paper, which is of non-standard thickness (less than 52g/m2).

Note that feeding performance may be degraded when you scan documents of non-standard paper.

48