Chapter 6 Performing a Scan Test
Perform a scan test to determine if the scanner is work- | 4. Select the [Maintenance] button on the "Main | ||||
ing properly. Login as a regular user to perform the | Menu" screen. | ||||
scan test. |
|
|
|
|
|
1. Load the documents to be test scanned. |
|
|
|
|
|
|
|
|
|
| |
Side
Reverse
screen appears. ⇒ The "Maintenance"
However, if the scanner is setup for automatic 5. Press the [Scan Test] button. login, the "Login" screen is not shown.
Proceed to Step 4.
2.On the "Login" screen, enter a "User Name" and "Password".
Enter "guest" for the User Name and Password fields.
⇒ The scan settings information for the scan test is displayed.
6. Press the [Scan] button.
3.Press the [Login] button.
⇒If the user name and password are valid, the "Main Menu" screen appears.
⇒ Scanning starts. When the scan has completed, the "Scan Viewer" opens.
7. Check the scanned data.
8.Press the [OK] button.
⇒The "Maintenance" screen is shown again.
■If Scanning Completes Successfully
Continue with the setting procedures described in Chapter 1 of the "Operator's Guide".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ATTENTION |
|
|
|
| To disable login with a guest | |||||||||||||||||||||||||||
|
|
|
| account, select [Off] for "Guest | ||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
| Account" in the [System Settings] | |||||||||||||||||||||||
|
|
|
|
|
|
|
|
| screen on the [Login Settings] tab. | |||||||||||||||||||||||
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| System settings or user data can be | ||||||||||||||||||||||||
HINT |
|
|
| backed up from the [User Data Store] | ||||||||||||||||||||||||||||
|
|
|
|
|
|
|
| or [System Settings File] screen on | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
|
|
|
|
|
|
|
| the [Maintenance] tab. This can only | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| be performed via the network | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| interface. Backup should be per- | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| formed regularly. This can only be | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| performed via the network interface | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| using the Admin Tool or Central Admin | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| Console. | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| For more details, refer to the "Opera- | ||||||||||||||||||||||||
|
|
|
|
|
|
|
| tor's Guide". | ||||||||||||||||||||||||
■If Scanning does not Complete Successfully
If the top cover is open
• Message
Top cover may be open. Close the top cover, reload the documents and try again.
• Action
Close the top cover, and try the scan test again.
If no document is loaded
• Message
Document not found. Load a document into the ADF, making sure the side guides are adjusted correctly and try again.
• Action
Load a document, and try the scan test again. If a multifeed is detected
• Message
Feed Error: Document(s) may not match the set paper size, ADF may have grabbed more than one sheet, or documents may not be suitable for scanning. Remove the documents from the ADF, check them and try again. If problem persists, consult the manual.
• Action
Remove the document for which multifeed was detected, and try the scan test again.
If a paper jam occurs
• Message
Paper jam has occurred. Remove the documents from the ADF and try again.
• Action
If the "Scan Viewer" screen appears with partially scanned data, just click the [OK] button. Remove any unscanned documents from the ADF. Open the scanner's top cover, remove the jammed document from the scanner, and close the scanner's top cover. From the "Maintenance" screen, try the test scan again.
If a problem is detected with the scanner
• Message
Scanner initialization has failed. Try turning the power off and back on again. The administrator should contact the FUJITSU scanner dealer or an authorized FUJITSU scanner service provider for help.
• Action
Try the following:
• If the scanner does not restart automatically, press the [Shutdown] button on the "Login" screen to turn the power off, and turn the power back on again to restart the scanner.
• If the error status persists after the scanner is restarted, press the [Shutdown] button on the "Login" screen, disconnect the AC cable from the scanner to turn
for at least ten seconds, then reconnect the AC cable and try turning the power back on again. If the error status persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
15
16