Appendix C Replacing Parts

fi-6010N Network Scanner Getting Started

■Part No. and Replacement Cycle for Carrier Sheet

The glass scanner windows

￿￿￿￿￿￿￿ inside the ADF can become hot when the scanner is used.

Before cleaning inside the scanner or replacing any parts, turn off the power, unplug the AC adapter from the outlet, and wait for at least 15 minutes.

■Part No. and Replacement Cycle for Consumable Parts

nTheb checkedusagecountin of consumable parts ca

the "Usage Status" screen on the [Device Status] tab.

When parts need to be replaced soon, the "Status" information field becomes orange. When parts need to be replaced immediately, the "Status" information field becomes red.

The following table specifies the replacement part numbers and the standard replacement cycles.

Part Name

Replacement Cycle

 

 

Pad assembly

After every 50,000 sheets

(Pad ASSY)

scanned or once a year

(PA03289-0111)

 

 

 

Pick roller

After every 100,000 sheets

(PA03289-0001)

scanned or once a year

To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner service provider. These replacement cycles are rough guidelines when

using 64 g/m2 (17 lb) A4/Letter woodfree or wood containing paper. They may vary according to the type of

ng fre- documents scanned, scanner quency.

Use only the PFU LIMITED parts

ATTENTIONspecified. Do not use consumable parts made by other manufacturers.

The following diagram shows the locations of the consumable parts in the scanner. For more details, refer to the "Operator's Guide".

■Pad Assembly (PAD ASSY)
■Pick Roller

Pick roller

Pick roller's shaft

One "Carrier Sheet" is provided with the scanner. If the "Carrier Sheet" provided with the scanner can no longer be used for scanning due to damage or wear-and-tear, you can purchase a new Carrier Sheet separately.

The following table specifies the replacement number and the standard replacement cycle for carrier sheets.

Part Name

No. of

Replacement Cycle

items

 

 

 

 

 

Carrier Sheet

5

After used for 500

(PA03360-0013)

 

scans

 

 

 

Contact your FUJITSU scanner dealer or an authorized

FUJITSU scanner service provider to obtain these prod-

ucts.

 

 

This replacement cycle is a rough guideline. This may

vary according to the type of documents scanned, scan-

ner usage, and cleaning frequency. If parts become

noticeably dirty, replace them accordingly.

Use only the PFU LIMITED parts

ATTENTIONspecified. Do not use parts made by other manufacturers.

The following diagram shows the Carrier Sheet. For more details, refer to the "Operator's Guide".

■Carrier Sheet

21

22