Fujitsu fi-60F Basic Specifications

4.1		Basic Specifications

	1		Scanner Type			Flatbed	-

	2		Image sensor			Color Contact Image Sensor
						(CMOS IC)

	3		Light source			Three LEDs (RGB)

	4		Scanning		Maximum	148 x105mm	A6
			area			5.8 in X 4.13 in
			area			5.8 in X 4.13 in	-
							-

	5		Scanning		Binary	1.0 sec	200 dpi, max size
			Speed		(monochrome)		USB 2.0

			(Note (*1))		Color	1.3 sec	150 dpi max size
			(Note (*1))				USB 2.0
							USB 2.0

	6		Optical Resolution			600 dpi	-

	7		Output reso-		Binary	50 - 600 dpi	Scalable in 1 dpi incre-
			lution		(monochrome)		ments

					Grayscale	50 - 600 dpi	Scalable in 1 dpi incre-
							ments

					Color	50 - 600 dpi	Scalable in 1 dpi incre-
							ments

	8		Grayscale level			8 bits per color	Internal 16 bits
			(internal)

	9		Halftone Patterns			Dither / error diffusion	-

	10		Interface			USB 2.0 / 1.1	B type
			(Note (*2))

*1) The scanning speed is the maximum speed of the scanner hardware. Software processing time such as data transfer time is added to the actual scanning time.

*2) If you connect the scanner with USB 2.0, it is required that the USB port and the Hub are compliant with USB 2.0. The scanning speed may slow down when you connect the scanner with USB 1.1. If your computer has the compatible USB 2.0 port, please use it.

36

Contents

Page Page CONTENTS ■ Regulatory Information ■ Note, Liability ■ Safety Precautions Chapter 1 BASIC SCANNER OPERATIONS SCANNER SPECIFICATION INDEX IN-1 INTRODUCTION ■Regulatory Information Canadian DOC Regulations Bescheinigung des Herstellers / Importeurs International ENERGY STAR® Program NERGY TAR Trademarks How Trademarks Are Indicated In This Manual Manufacturer ■Note, Liability Screen Examples In This Manual About Maintenance ■SafetyPrecautions Turn the scanner OFF if it is damaged Do not put liquids inside the scanner Do not touch the inside of the scanner unless necessary Do not use the scanner if there is a strange odor Do not install the scanner on unstable surfaces Do not place heavy objects or stand on top of the scanner Firmly insert the power plug Before moving the scanner, disconnect the power plug from the power outlet Protect the scanner from static electricity Do not use aerosol sprays near the scanner Do not install the scanner in direct sunlight Before moving the scanner, make sure the shipping lock is locked Page BASIC SCANNER OPERATIONS 1.1 Turning the Scanner ON 1.2Loading Documents on the Scanner for Scanning Page 1.3 How to Use the Scanner Driver Using the FUJITSU TWAIN32 Scanner Driver for scanning Page Page Setting Window for FUJITSU TWAIN32 Scanner Driver Image Mode [Scan] button [Preview] button [Close] button [Reset] button [Option...] button [Rotation] tab [Generic] tab [Filter] tab [Advance...] button Using the FUJITSU ISIS Scanner Driver for Scanning Page Page Configuration Window of FUJITSU ISIS Scanner Driver Halftone Brightness Contrast Automatic Size and Skew detection [Area...] button [More...] button Gamma DTC Variance Edge Processing Dropout Color Reverse 1.4 Correcting skewed documents Page 1.5 Excluding a Color in the Image (dropout color) DAILY CARE 2.1 Cleaning Materials 2.2 Cleaning the Scanner Page Page TROUBLESHOOTING 3.1 Remedying Typical Troubles Page Page Page Page Page 3.2Items to Check Before Contacting the Agent Where You Bought the Scanner ■Installation or PC connection issues ■Problem at the time of personal computer connection ■ Imaging system trouble ■Other 3.3 Checking the Label on the Scanner SCANNER SPECIFICATION Basic Specifications 4.2 Installation Specifications 4.3 External Dimensions INDEX Page Page P3PC-1112-01EN