■Flatbed type

Check

Function

Send to

Scan / Stop

Power

Check LED

Function Number Display [Function] button [Send to] button

[Scan/Stop] button

[Power] button/Power LED

Name

Description

 

 

Check LED

Lights (in orange) when an error occurs.

 

 

Function Number Display

Indicates the scanner status.

 

 

[Function] button

Switches the function activated by the [Send to] button.

 

 

[Send to] button

Launches linked application software for scanning.

 

Resets an error indication.

 

 

[Scan/Stop] button

Launches linked application software for scanning.

 

Resets an error indication.

 

Cancels ongoing scanning.

 

 

[Power] button/Power LED

Turns the scanner ON and OFF.

 

Lights (in green) when the scanner is turned ON.

 

 

■Indications on the Function Number Display

Indication

Function

 

 

8Blinks only one time upon turning on the scanner.

PIndicates that the scanner has been turned ON and is being initialized.

1Indicates that the scanner is ready for scanning.

This means initialization has ended successfully after power-on. This status is called “Ready Status.”

JIndicates that a recoverable error occurred during scanning with the scanner.

U “J” or “U” and an “error number” are displayed alternately.

For details of the errors, refer to “Temporary Errors“ in the Operator’s Guide.

After the error has been resolved, you can return to the Ready Status (see “1” above) by pressing the [Scan/Stop] or [Send to] button.

EIndicates that an abnormality (device error) occurred in the scanner during its initialization or

Fduring scanning documents.

C“E”, “F”, “C”, “H”, “A”, or “L” and an “error number” are displayed alternately. When the error

H number is displayed, turn the Main Power Switch OFF and then ON again. If the error

A persists after this, contact the dealer where you purchased the scanner or an authorized

LFUJITSU scanner service provider.

12