2Installing the Scanner

The following describes how to install the scanner.

1 Place the scanner at its installation site.

The outer dimensions and the spaces required for installing the respective scanner types are as follows:

ADF type
Flatbed type

(Unit: mm/inches)

 

 

390 (15.3)

 

640 (25.1)

 

 

 

 

300 (11.8)

500

342

 

700

(13.4)

432 (17.0)

(27.5)

(19.6)

 

 

 

 

686

329

 

690 (27.1)

(27.0)

 

(13.0)

 

 

 

1179

 

1030 (40.5)

 

(46.4)

 

 

 

 

Outer dimensions

Installation space

2 Unlock the Transport Lock (Flatbed type only).

Using a coin or similar, rotate the Transport Lock counterclockwise by 90 degree to unlock it.

3 Adjust the position of the ADF (Flatbed type only).1)Holding the handle, lift open the Document Cover.

2)Remove the ADF Lock Screws, and then set them to the Lock Screw Storage Holes.

13