Make sure to ground to avoid electric shock. Be sure to ground before plugging into a Power outlet.
Unplug from the outlet before removing the ground connection.
Use the scanner only at the indicated power voltage. Do not connect to
Use the scanner only at the indicated power voltage and current. Improper power voltage or current might cause fire or electric shock. Do not connect to
Do not touch the power plug with wet hands. Doing so might cause electric shock.
Wipe off any dust from the power plug.Wipe off any dust from the metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric shock.
Do not install the scanner in a location that has oil smoke, steam, humidity, and dust.
Do not install the scanner in a location subject to oil smoke, steam, humidity, and dust. Doing so might cause a fire or electric shock.
Do not use the scanner if there is a strange odor.If you detect excessive heat coming from the scanner or detect smoke, strange smells or noises during the operation, immediately disconnect the power plug from the Power outlet. Before contacting the store where you bought the scanner or an authorized FUJITSU scanner service provider, make sure that any smoke coming from it has completely stopped. Never try fixing such problems by yourself. Doing so is dangerous.
Disconnect the power if the scanner is damaged.If the scanner is damaged for any reason, immediately disconnect the power plug from the Power outlet. Then, contact the store where you bought the scanner or an authorized FUJITSU scanner service provider.
Do not insert or drop any metal objects into the ADF slot or ventilation ports on the scanner. Do not scan any wet documents or documents with paper clips or staples attached.
Do not splash or allow the scanner to get wet. If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner, immediately disconnect the power plug from the Power outlet. Then, contact the store where you bought the scanner or an authorized FUJITSU scanner service provider. Pay particular attention to this warning in households where there are small children.
Unplug the scanner when a trouble occurs.Immediately unplug the scanner when a trouble occurs.
Never cut the ground connection until the scanner is unplugged from the Power outlet.
Do not disassemble the scanner.Do not take apart or modify the scanner. The inside of the scanner contains
Touching these components might cause electric shock or fire.
Do not use aerosol or alcohol sprays near the scanner.Do not use any flammable substance or alcohol based cleaning sprays (such as aerosol sprays) to clean the scanner.
Sparks, caused by static electricity, generated when blowing off dust and dirt from the outside of the scanner, may cause a fire.
Do not place the scanner within the reach of small children.To avoid injuries, do not place the scanner in an area where small children may be able to reach.
Do not touch the heated section for a long time.Do not touch the heated section such as the bottom of the scanner for a long time.
Doing so may cause a
Do not use the scanner while covered with a blanket, etc. Doing so may raise the temperature inside and cause a fire.
Do not use the scanner where it gets wet.Do not use the scanner at a place such as a bathroom, shower room, or swimming pool where it may easily get wet. Doing so might cause electric shock or fire.
6