Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu FI-6670, FI-6770 Part Names and Functions, ■fi-6670(ADF type), „fi-6670

1 26

Download 26 pages, 1.56 Mb

Part Names and Functions

This section describes the scanner parts and their functions.

For information on the function of each part, refer to “Section 1.2 Scanner Parts and Their Functions” in the Operator’s Guide.

■fi-6670 (ADF type)

ADF (automatic document feeder)

Stacker

Stacker Extension

Stopper

EXT Connector

Chute Roller Cover

ADF Paper Chute

Paper Chute

Extension

Side Guide

Side Guide Button

Operator Panel

ADF Open Button	fi-6670	SCSI ID Switch
	Power Connector	Ventilation
	Main Power Switch	Ventilation
	Main Power Switch	Port





CGA Board Slot								SCSI Connector

USB Connector

Cable Cover

Contents

Installing the Scanner Connecting the Cables Installing the Scanner Software 5 Test-ScanningDocuments Introduction Scanner Models Manuals Trademarks Manufacturer Regulatory Information FCC Declaration Canadian DOC Regulations Bescheimigung des Herstellers/ Importeurs ENERGY STAR® Precautions Liability Note Use of Mercury Arrow Symbols in This Manual Maintenance Safety Information Warning Indications Used In This Manual Make sure to ground the scanner Do not touch the Power cable with wet hands Wipe off any dust from the power plug Do not use the scanner if there is a strange odor Disconnect the power if the scanner is damaged Do not install the scanner on an unstable work table Firmly insert the power plug Do not block the ventilation ports Do not place heavy objects or stand on the top of the scanner Before moving the scanner, disconnect the power plug from the Power outlet 1Preparation Contents of the Scanner Package Part Names and Functions ■fi-6670(ADF type) ■fi-6770/fi-6750S(Flatbed type) ■Model-CommonParts Functions of the Operator Panel ■ADF type ■Flatbed type ■Indications on the Function Number Display 2Installing the Scanner ADF type 3)Gently close the Document Cover 4)Change the position of the ADF 4 Attach the Stacker and the ADF Paper Chute to the scanner 3Connecting the Cables Make sure that the computer is turned OFF Open the Cable Cover (ADF type only) Connect the scanner to your computer either with a USB or SCSI cable 5 Close the Cable Cover (ADF type only) Let the cables out from the side slots of the scanner 4Installing the Scanner Software Brief Information on the Bundled Software ■TWAIN Driver ■ISIS Driver ■Software Operation Panel ■QuickScan ProTM (trial) [QuickScan Pro (Trial)] (*1) ■Manuals ■Scanner Central Admin Agent ■Adobe® Reader™ Installing the Bundled Software Confirm that the scanner is not turned ON The following describes how to install the software 2 Turn on your computer and log onto Windows 3 Insert the Setup DVD-ROMinto your disk drive DThe [FUJITSU Image Scanner Setup] screen appears INSTALL (Custom) 4 Click the [INSTALL (Custom)] button DThe [INSTALL PRODUCTS] screen appears Click the button for the software to be installed Install the software, following the on-screeninstructions 5Test-ScanningDocuments 4 Load a sheet into the scanner 1)Load the document on the ADF Paper Chute face down 2)Align the side guides to the width of the document Pull out the Stacker to the length of the document, and then raise the Stopper Launch ScandAll PRO 10Select the [Scan] menu D [Scan Settings] DThe [Scan Settings] dialog box appears 11Clear the [Save to file] checkbox 12Click the [Scanner Setting] button DThe scanner driver’s setting dialog box appears ■ISIS scanner driver ■Kofax VRS 14In the [Scan Settings] dialog box, click the [Scan] button DThe scanned document images are displayed in the ScandAll PRO window fi-6670/fi-6770/fi-6750SImage Scanner Getting Started