Reading Mode Setting (M3097DE)
This section describes the button specifications and setup details for each of the simplex
When reading mode is set by the command from the host computer, the following button operation is not required.
At any time you press 
, scanner returns to screen M1
1 Turn the power ON and verifty that | <Screen M1> |
“Scanner Ready” is displayed on LCD. |
|
2Press 
then the scanner displays Screen M2.
3Press 
then the scanner displays Screen 1.
4Select ADF or FB by pressing 
or 
then press 
. The scanner displays Screen 2.
5Select “Simplex” or “Duplex” by pressing
or 
. Then press Enter. The scan- ner displays Screen 3.
6Select “Portrait” or “Landscape” by
pressing 
or 
. Then press 
. The scanner displays Screen 4.
<Screen M2>
<Screen 1>
<Screen 2>
<Screen 3>
