Fujitsu M3097DG, M3097DE manual Manual Feed Mode Setting

Manual Feed Mode Setting

In this mode, the scanner waits for some predetermined time without issuing “Paper Empty” after all documents are read. This predetermined time (time-out limit) is specified by Setup mode. Therefore you can set next documents on ADF chute without interrupting reading operation. The procedures for setting manual feed mode are as follows.

1Turn the power ON and verify that “Scanner Ready” is displayed on LCD.

2Press then the scanner displays Screen M2.

3Press then the scanner displays Screen M3.

4Press then the scanner displays Screen M4.

5Select “Yes” by pressing . Then press .

6Press to return to “Scanner Ready” screen. Note that “Manual Feed” is shown on LCD. This means that the scanner is in Manual Feed mode.

<Screen M1>

<Screen M2>

<Screen M3>

<Screen M4>

<Screen M1>

3-6