Fujitsu MAG3182LC, MAF3364LP, MAF3364LC, MAE3182LC, MAE3091LC manual MAE series/MAG series, MAF series

(*1) The formatted capacity can be changed by changing the logical block length and using spare sector space. See Chapter 3 for the further information.

(*2) The number of user cylinders indicates the max., and includes the alternate cylinder. The

number of user cylinders and alternate cylinders can be specified at format of the IDD.

(*3) The positioning time is as follows:

Seek time [ms]						Seek time [ms]
12							12
10							10
8							8
6							6
4							4
2							2
0							0
0	2000	4000	6000	8000	10000	12000	0	2000	4000	6000	8000	10000	12000
		Seek Difference							Seek Difference
	MAE series/MAG series								MAF series

(*4) The start time is the time from power on or start command to when the IDD is ready, and stop time is the time for disks to completely stop from power off or stop command.

(*5) This value indicates at ready mode.

(*6) Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.

(*7) 5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m.

(*8) 1 on 1 connection case.

(*9) 1 host, 15 devices case.

(*10) The maximum data transfer rate may be restricted to the response speed of initiator and by transmission characteristics.

(*11) The terminator power pin (SCSI connector) which supplies power to other terminators is not used.

C141-E064-03EN 2 - 3