Fujitsu MAF3364LC, MAF3364LP manual SCSI Function Specifications, 3 SCSI function specifications

2.2SCSI Function Specifications

Table 2.3 shows the SCSI functions provided with the IDD.

Table 2.3 SCSI function specifications

		Item		Specification
	Single-ended type				Ο
	HVD type (High Voltage Differential)				×
Electrical	LVD type (Low Voltage Differential)				Ο
	Single-ended type		Position where the terminating		×
requirements
(*1)			resistor is mounted on the PCA
	Differential type		Position where the terminating		×
			resistor is mounted on the PCA
	TERMPWR signal send function				Ο
Connector	68 pin P cable connector				Ο
	80 pin SCA2 connector				Ο
Data bus parity (*2)					Ο
Bus arbitration function					Ο
Disconnection/reconnection function					Ο
	SCSI ID	16-bit SCSI			#0 to #15
Addressing				(Jumper selection)
	LUN (logical unit number)				#0 fixed
Data transfer	8-bit SCSI (Single-Ended type)			Ο 20 MB/s max.
(Synchronous		(LVD type)		Ο 40 MB/s max.
mode)	16-bit SCSI (Single-Ended type)			Ο 40 MB/s max.
		(LVD type)		Ο 80 MB/s max.
		(160/m LVD type)		Ο 160 MB/s max.
				2 MB (LC/LP) or 4 MB
Data buffer				(MC/MP) programmable multi-
				segment buffer (1 to 32)
Data block length (Logical data length=Physical data length) (*3)				512 to 528 bytes
				(Fixed length)
			Ο : Provided		× : Not provided

(*1) Single-Ended and LVD detect the driver mode by Diffsence signal and automatically change.

(*2) Data bus CRC on MC/MP models.

(*3) Refer to (12) of Section 1.1.

C141-E064-03EN 2 - 7