Fujitsu MAW3300NC/NP, MAW3073NC/NP, MAW3147NC/NP manual Maintenance requirements

CAUTION

1.Always ground yourself with a wrist strap connected to ground before handling. ESD (Electrostatics Discharge) may cause the damage to the device.

2.To prevent electrical damage to the disk drive, turn the power off before connecting or disconnecting a cable, connector, or plug.

3.Do not remove a PCA.

4.Do not use a conductive cleaner to clean a disk drive assembly.

5.Ribbon cables are marked with a colored line. Connect the ribbon cable to a cable connector with the colored wire connected to pin 1.

6.2.2Maintenance requirements

(1)Preventive maintenance

Preventive maintenance is not required.

(2)Service life

See "(3) Service life," in Section 2.1.5.

(3)Parts that can be replaced in the field

The PCA cannot be replaced in the field. The DE cannot be replaced in the field.

(4)Service system and repairs

Fujitsu has the service system and repair facility for the disk drive. Contact Fujitsu representative to submit information for replacing or repairing the disk drive. Generally, the following information must be included:

a)HDD model, part number (P/N), revision number, serial number (S/N), and date of manufacturing

b)Error status

•Date when the error occurred

•System configuration

•Environmental conditions (temperature, humidity, and voltage)

c)Error history

6-6 C141-E226