Fujitsu MHM2100AT, MHM200AT, MHM215OAT, MHL2300AT manual Xvi C141-E104-02EN

Contents

Table 4.1	Self-calibration execution timechart				4-10
Table 4.2	Write precompensation algorithm			4-11
Table 5.1	Signal assignment on the interface connector					5-3
Table 5.2	I/O registers 5-7
Table 5.3	Command code and parameters			5-14
Table 5.4	Information to be read by IDENTIFY DEVICE command							5-32
Table 5.5	Features register values and settable modes					5-41
Table 5.6	Diagnostic code	5-52
Table 5.7	Features Register values (subcommands) and functions							5-64
Table 5.8	Format of device attribute value data				5-68
Table 5.9	Format of insurance failure threshold value data						5-68
Table 5.10	SMART error log data format		5-72
Table 5.11	SMART self test log data format			5-74
Table 5.12	Contents of security password		5-76
Table 5.13	Contents of SECURITY SET PASSWORD data						5-80
Table 5.14	Relationship between combination of Identifier and Security level,
	and operation of the lock function			5-80
Table 5.15	Command code and parameters			5-83
Table 5.16	Parallel generation equation of CRC polynomial						5-105
Table 5.17	Recommended series termination for Ultra DMA						5-106
Table 5.18	Ultra DMA data burst timing requirements					5-111
Table 6.1	Default parameters	6-7

xvi C141-E104-02EN